Benutzerspezifische Werkzeuge
Sie sind hier: Startseite → Forum → BAZ Forum → Sonstige CAD/CAM Software (3rd-Party) → Milling solid wood surfaces
Navigation
Anmelden


Passwort vergessen?
Neuer Benutzer?
 
Register Login
Milling solid wood surfaces
Discussion Icon by SAT elkor at 24.09.2010 16:07

Hello.
we are milling surfaces on solid wood.
The machine is millin 0.25mm in each step, so we need to work in high feed speed.
The feed-speed programed on the MT manager is 6M/min but machine can not reach this speed.

I use to work on metall machining and can remember there was a G function wich enables to execute all the program lines whith no stops betwen each line.

Any solution for this?
Thanks for your help.

Discussion Icon by Heiko Benke at 27.09.2010 16:03

Hello,

first of all: What for a machine do you have actually? It helps extremely, if we know such a thing!

SAT elkor wrote:

we are milling surfaces on solid wood.
The machine is millin 0.25mm in each step, so we need to work in high feed speed.
The feed-speed programed on the MT manager is 6M/min but machine can not reach this speed.


Is the length of your surfaces, which you would like to mill, long enough? The machine needs to achieve at least a certain distance around the feed speed.
Please check the potentiometer on the hand controller whether the adjustments at these with that at the screen agree (see picture poti.jpg).
If applies, please check the adjustment at the tool, if there is the feed speed (max) directly or higher than the feed speed which you want to use (see picture tool.jpg).


SAT elkor wrote:

I use to work on metall machining and can remember there was a G function wich enables to execute all the program lines whith no stops betwen each line.


This function is called “G64 – look ahead” but we do not use these.


kind regards
Heiko Benke

edited by Heiko Benke at 27.09.2010 16:08

Discussion Icon by SAT elkor at 28.09.2010 19:10

Hello again.

We are workind on a dynestic 7515.

How can we put G64? we try to write on DinIso Line, and it doesn´t work.

Thanks again.

Heiko Benke wrote:

Hello,

first of all: What for a machine do you have actually? It helps extremely, if we know such a thing!

SAT elkor wrote:

we are milling surfaces on solid wood.
The machine is millin 0.25mm in each step, so we need to work in high feed speed.
The feed-speed programed on the MT manager is 6M/min but machine can not reach this speed.


Is the length of your surfaces, which you would like to mill, long enough? The machine needs to achieve at least a certain distance around the feed speed.
Please check the potentiometer on the hand controller whether the adjustments at these with that at the screen agree (see picture poti.jpg).
If applies, please check the adjustment at the tool, if there is the feed speed (max) directly or higher than the feed speed which you want to use (see picture tool.jpg).


SAT elkor wrote:

I use to work on metall machining and can remember there was a G function wich enables to execute all the program lines whith no stops betwen each line.


This function is called “G64 – look ahead” but we do not use these.


kind regards
Heiko Benke

Discussion Icon by Heiko Benke at 29.09.2010 11:10

Hello,

Is the problem with your feed speed meanwhile cleared?

Now, that we know what for a machine you have, we can say G64 is a SIEMENS function and you have a BECKHOFF-CNC. Not all G-functions are the same in Beckhoff control and just G64 doesn´t exist.
I have added an overview of all G-functions for Bechkhoff control.

What is your problem actually that you want to solve with G64? Perhaps we can help you differently.


kind regards
Heiko Benke

edited by Robert Klampfl at 01.10.2010 10:36

Posts per page