error inverter 2 — Holz-Her

error inverter 2

by Darko Sutlovic at 03.03.2010 13:21

Dear Sir,
my Sprint 1317 is reporting error on inverter 2.

What can i do or check before i call a repairman and what can be a cause of this error?
Thanks in advance

by Robert Klampfl at 03.03.2010 15:26

Dear Mister Sutlovic,

When appears the error message, during working or when you startup the machine?
Is the problem solved, when you restart the machine?
If you use a convertor from Telemechanique, there are some messages on convertor self, which you can check.
When you startup the machine, push the green button on panel to switch on the control voltage.
After that open the electric cabinet, check the displays on your convertors. Every one should show the message 'rdy'.
Your second convertor should show a other message, if there is a problem.
Please tell me what message and what kind on convertor you have.

With best regards
Robert Klampfl

by Darko Sutlovic at 06.03.2010 09:52

Dear Mr Klampfl,
the problem couldnt be resolved by restarting the machine. Eventually the repairman came and rehooked some wires in the electric cabinet of the machine, so the problem is fixed. Thx anyway

edited by Robert Klampfl at 09.03.2010 17:20

Holz-Her - FAQ/Support

Sektionen

Benutzerspezifische Werkzeuge